Lipid-protein interactions in the membrane: studies with model peptides

We have used fluorescence quenching of tryptophan-containing trans-membrane peptides by bromine-containing phospholipids to study the specificity of peptide-lipid interactions. We have synthesized peptides Ac-K2GLm WLnK2A-amide where m = 7 and n = 9 (L16) and m = 10 and n = 12 (L22). Binding constants of L22 for dioleoylphosphatidylserine [di(C18 : 1)PS] or dioleoylphosphatidic acid [di(C18 : 1)PA] relative to dieoleoylphosphatidylcholine [di(C18 : 1)PC] were close to 1. However, for L16, whilst the bulk of the di(C18 : 1)PA molecules bound with a binding constant relative to di(C18 : 1)PC close to 1, a small number of di(C18 : 1)PA molecules bound much more strongly. Assuming just one high affinity binding site on L16 for anionic lipid, the affinity of the site for di(C18 : 1)PS was calculated to be ca. 8 times that for di (C18 : 1)PC. The relative binding constant was little affected by ionic strength and close contact between the anionic headgroup of di(C18 : 1)PS and a lysine residue on the peptide was suggested. The relative binding constant for di(C18 : 1)PS at this high affinity site was less than for di(C18 : 1)PA. Cholesterol interacts with L22 with an affinity about 0.7 of that of di(C18 : 1)PC. The structure of the peptide itself is important. The peptide Ac-KKGYL6WL8YKKA-amide (Y2L14) incorporated into bilayers of dinervonylphosphatidylcholine [di(C24 : 1)PC] whereas L16 did not incorporate into this lipid. It is suggested that thinning of a lipid bilayer around a peptide to give optimal hydrophobic matching is less energetically unfavourable when a Tyr residue is located in the lipid/water interfacial region.     

Remote Raman and fluorescence studies of mineral samples

In the present study, we investigated remote laser-induced fluorescence (LIF), at a distance of 4.8 m, of a variety of natural minerals and rocks, and Hawaiian Ti (Cordyline terminalis) plant leaves. These minerals included calcite cleavage, calcite onex and calcite travertine, gypsum, fluorapatite, Dover flint and chalk, chalcedony and nephelene syenite, and rubies containing rock. Pulsed laser excitation of the samples at 355 and 266 nm often resulted in strong fluorescence. The LIF bands in the violet-blue region at approximately 413 and approximately 437 nm were observed only in the spectrum of calcite cleavage. The green LIF bands with band maxima in the narrow range of approximately 501-504 nm were observed in the spectra of all the minerals with the exception of the nephelene syenite and ruby rocks. The LIF red bands were observed in the range approximately 685-711 nm in all samples. Excitation with 532 nm wavelength laser gave broad but relatively low fluorescence background in the low-frequency region of the Raman spectra of these minerals. One microsecond signal gating was effective in removing nearly all background fluorescence (with peak at approximately 610 nm) from calcite cleavage Raman spectra, indicating that the fluorescence was probably from long-lifetime inorganic phosphorescence.     

Microwave assisted synthesis of an unusual dinitro phytochemical

A novel dinitro secondary metabolite, 2-nitro-4-(2^′-nitroethenyl)phenol from a marine source, has been prepared via highly accelerated, microwave assisted, nitration reactions using mild reagents. ipso-Substitution of a carboxy group by a nitro group is discussed.     

Solvolytic behaviour and the solubilities of various inorganic compounds, lewis acids and bases in fused monobromo acetic acid solvent system—II

Solubilities and the solvolytic behaviour of various inorganic compounds, Lewis acids and bases in fused monobromoacetic acid at 60 ± 0.5°C are discussed. Ionic compounds are fairly soluble, iodides and thiocyanates being comparatively more soluble than chlorides and bromides. Tetraalkyl ammonium halides are highly soluble in this solvent. Conductometric and spectroscopic studies of various Lewis acids and bases in fused monobromoacetic acid indicate their solvolytic behaviour and their subsequent ionization. The solvolyses products BBr₃·CH₂BrCOOH and SbCl₅·CH₂BrCOOH have been observed to be the strongest Bronsted acids. Auto-ionization of this solvent has been supported by acid/base titrations.     

Investigation into new materials for optical devices: the miscibility and solvent effects of azobenzene derivative blends

With the increasing demand for novel devices with optical applications the search for new materials to data store and process becomes a priority. By introducing blends, tailor made properties and low cost give added advantage. Miscibility is an essential requirement for a new material, this research thus involves miscibility studies of poly(4‐(N‐(2‐methacryloyloxyethyl)‐N‐ethylamino)‐4′‐nitroazobenzene)₉₀‐co‐(methyl methacrylate)₁₀, (azobenzene derivative) with polymethyl‐methacrylate (PMMA), polyvinylacetate (PVAc) and polyvinylchloride (PVC) prepared in tetrahydrofuran (THF), and/or dimethylformamide (DMF) and/or dichloromethane (CH₂Cl₂). The glass transitions, solvent and varying molecular weight effect were investigated, since these all primarily influence the miscibility. THF was found to encourage miscibility at specific compositions of PVAc and PVC blends. However, with CH₂Cl₂ and DMF immiscibility is encouraged. The Fox–Flory equation was applied to the blends analyzing the PVC blends in DMF as deviations from ideality. Different molecular weights of PMMA were identified as immiscible regardless of solvent. PMMA's lower solubility in THF and CH₂Cl₂ compared to the azobenzene derivative, displayed the existence of PMMA islands. In all blends the favorable and unfavorable interactions between polymer–solvent–polymer systems are considered. Furthermore, the miscibility effect on increasing the MMA content of the azobenzene derivative was also investigated. Copyright © 2002 John Wiley & Sons, Ltd.     

A new glycoside, 3-O-demethylcolchicine-3-O-alpha-d-glucopyranoside, from Gloriosa superba seeds

A new colchicine glycoside, 3-O-demethylcolchicine-3-O-alpha-D-glucopyranoside, has been isolated from Gloriosa superba seeds. The assigned structure has been corroborated by spectroscopic data and enzymatic hydrolysis.     

Adsorption isotherm and atomic force microscopy studies of the interactions between polymers and surfactants on steel surfaces in hydrocarbon media

The adsorption isotherms for certain polymer and surfactant molecules (and in some cases their mixtures) on stainless steel beads from isooctane have been obtained, together with corresponding adsorbed layer thicknesses, using an atomic force microscope. The polymer is a terminally functionalised (ethylene diamine), low molecular weight polyisobutylene (PIB) derivative and the surfactants are basically alkyl or alkyl phenol alkoxylate molecules, which in one case has been derivatised with an amino functionality. The results indicate the presence of multilayers at the stainless steel-isooctane interface. Theoretical analysis of the surfactant adsorption isotherms suggests molecular aggregation at the interface with an aggregation number between 2 and 6, at the highest coverages. The adsorption of the polymer is reduced in the presence of the surfactant molecules. The polymer leaches metal ions from the steel surface at higher concentrations.     

Fibre-optic fluorosensor for sulphur dioxide

A fibre-optic sensor for continuous measurement of sulphur dioxide is described. It is based on the dynamic quenching of the fluorescence of a polynuclear aromatic hydrocarbon [benzo(b)fluoranthene] which is immobilized in silicone polymer. Sulphur dioxide is shown to be an efficient quencher; Stern-Volmer graphs are given which describe the relation between SO₂ concentration and relative fluorescence. Detection limits are about 0.01% (v/v) SO₂ in air; the useful range is from 0.01–6% (v/v). Other gases likely to occur in air were found to be inert, except for oxygen which also acts as a dynamic quencher. Its interference is negligible for SO₂ levels below 6% in air at constant oxygen pressure, because the quenching efficiency of SO₂ is about 26 times higher than that of oxygen. For varying oxygen levels, a two-sensor technique is suggested.     

Complexes formed between nitrilotris(methylenephosphonic acid) and M(2+) transition metals: isostructural organic-inorganic hybrids

Nitrilotris(methylenephosphonic acid) (NTP, [N(CH(2)PO(3)H(2))(3)]) recently has been found to form three-dimensional porous structures with encapsulation of templates as well as layered and linear structures with template intercalation. It was, therefore, of interest to examine the type of organic-inorganic hybrids that would form with metal cations. Mn(II) was found to replace two of the six acid protons, while a third proton bonds to the nitrilo nitrogen, forming a zwitter ion. Two types of compounds were obtained. When the ratio of acid to Mn(II) was less than 10, a trihydrate, Mn[HN(CH(2)PO(3)H)(3)(H(2)O)(3)] (2) formed. Compound 2 is monoclinic P2(1)/c, with a = 9.283(2) A, b = 16.027(3) A, c = 9.7742(2) A, beta = 115.209(3) degrees, V = 1315.0(5) A(3), and Z = 4. The Mn atoms form zigzag chains bridged by two of the three phosphonate groups. The third phosphonate group is only involved in hydrogen bonding. The metal atoms are octahedrally coordinated with three of the sites occupied by water molecules. Adjacent chains are hydrogen-bonded to each other through POH and HN donors, and the additional participation of all the water hydrogens in H-bonding results in a corrugated sheet-like structure. Use of excess NTP at a ratio to metal of 10 to 1 yields an anhydrous compound Mn[HN(CH(2)PO(3)H)(3)] (1), P2(1)/n, a = 9.129(1) A, b = 8.408(1) A, c = 13.453(1) A, beta = 97.830(2) degrees, V = 1023.0(2) A(3), and Z = 4. Manganese is five coordinate forming a distorted square pyramid with oxygens from five different phosphonate groups. The sixth oxygen is 2.85 A from an adjacent Mn, preventing octahedral coordination. All the protonated atoms, three phosphonate oxygens and N, form moderately strong hydrogen bonds in a compact three-dimensional structure. The open-structured trihydrate forms a series of isostructural compounds with other divalent transition metal ions as well as with mixed-metal compositions. This is indicative that the hydrogen bonding controls the type of structure formed irrespective of the cation.